TL-WR1042ND 300Mbps Wireless N Gigabit Router
4.17.2 IPv6 Setup
Figure 4-94 Enable/Disable IPv6
¾ Enable IPv6 - Tick the checkbox to enable the IPv6 function. It’s enabled by default.
¾ WAN Connection Type - Choose the correct WAN connection type based on your ISP
network topology.
z DHCPv6 - Connections which use dynamic IPv6 address assignment.
z Static IPv6 - Connections which use static IPv6 address assignment.
z PPPoEv6 - Connections which use PPPoEV6 that requires a user name and password.
z Tunnel 6to4 - Connections which use 6to4 address assignment.
Different types of WAN connection require you to do different settings. Below are the detailed
explanations for the respective type.
-90-
To Next Page
Loading...
