TL-WR542G 54Mbps Wireless Router User Guide
6
in Figure 2-1. (If you have the wireless NIC and want to use wireless function, you can
skip
this step.)
5. Connect the DSL/Cable Modem to the WAN port on the router, shown in Figure 2-1.
6. Connect the AC power adapter to the AC power socket on the router, and the other end into
an electrical outlet. The router will start to work automatically.
7. Power on your PC and Cable/DSL Modem.
Figure 2-1 Hardware Installation of the TL-WR542G 54Mbps Wireless Router
To Next Page
Loading...
