TL-WR702N 150Mbps Wireless N Nano Router
- 23 -
¾ PassWord - If the AP your Router is going to connect needs password, you need to fill the
password in this blank.
Click Survey button on the Wireless page as shown in Figure 3-18, and then AP List page will
appear as shown in Figure 3-19. Find the SSID of the Access Point you wan
t to access, and click
Connect in the corresponding row. For example, the third item is selected. The target network’s
SSID will be automatically filled into the corresponding box which is shown as the Figure 3-18.
Figure 3-19 AP List
2. Click Next in Figure 3-18, and then Wireless Secu
rity Settings page will appear as shown
in Figure 3-20.
To Next Page
Loading...
