TL-WR702N 150Mbps Wireless N Nano Router
- 45 -
¾ Reserved IP Address - The IP address reserved for the PC by the Router.
¾ Status - The status of this entry either Enabled or Disabled.
To Reserve an IP address:
1. Click the Add New… button. Then Figure 4-19 will pop-up.
2.
Enter the MAC address (in XX-XX-XX-XX-XX-XX format.) and IP address (in dotted-decimal
notation) of the computer for which you want to reserve an IP address.
3. Click the Save button.
Figure 4-19 Add or Modify an Address Reservation Entry
To modify or delete an existing entry:
1. Click the Modify in the entry you want to modify. If you want to delete the entry, click the
Delete.
2. Modify the information.
3. Click the Save button.
Click the Enable/Disabled All button to make all entries enabled/disabled
Click the Delete All button to delete all entries.
Click the Next button to go to the next page and Click the Previous button to return the previous
page.
4.8 System Tools
Figure 4-20 The System Tools menu
To Next Page
Loading...
