EasyManua.ls Logo

TP-Link TL-WR710N - Dhcp; DHCP Settings

TP-Link TL-WR710N
284 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
TL-WR710N 150Mbps Wireless N Mini Pocket Router
- 148 -
¾ Received Packets - Packets received by the station
¾ Sent Packets - Packets sent by the station
¾ Configure - The button is used for loading the item to the Wireless MAC Filtering list.
You cannot change any of the values on this page. To update this page and to show the current
connected wireless stations, click on the Refresh button.
If the numbers of connected wireless stations go beyond one page, click the Next button to go to
the next page and click the Previous button to return the previous page.
)
Note:
This page will be refreshed automatically every 5 seconds.
6.7 DHCP
Figure 6-15 The DHCP menu
There are three submenus under the DHCP menu (shown in Figure 6-15), DH
CP Settings,
DHCP Client List and Address Reservation. Click any of them, and you will be able to configure
the corresponding function.
6.7.1 DHCP Settings
Choose menu “DHCP DHCP Settings”, and then you can configure the DHCP Server on the
page as shown in Figure 6-16. The Router is set up by default as a DHCP (Dynamic Host
Configur
ation Protocol) server, which provides the TCP/IP configuration for all the PC(s) that are
connected to the Router in the LAN.

Table of Contents

Other manuals for TP-Link TL-WR710N

Related product manuals