141
Chapter 6
Congure the Router in Access Point Mode
6. 6. 3. SNMP Settings
Simple Network Management Protocol (SNMP) is a popular network monitoring and
management protocol, which allows management applications to retrieve status
updates and statisitics from the SNMP agent within this device.
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the
router.
2. Go to System Tools > SNMP Settings.
3. Specify SNMP settings and click Save.
• SNMP Agent - Enable or disable the SNMP agent. Choose Enable to open this
function if you want to have remote control through SNMPv1/v2 agent with
MIB-II. Choose Disable to close this function.
• Read Community - Enter the community name that allows Read-Only access
to this device’s SNMP information. The community name can be considered a
group password. The default setting is public.
To Next Page
Loading...
