6
B Configuration for Static IP
C Configuration for Dynamic IP
or
fter completing the above configuration, please proceed to Wireless Settings
Configuration.
This page will then display.
Click Next
Enter the IP Address,
Gateway, DNS provided
b
This page will then display.
Note
1. It’s strongly recommended that you visit and configure the Router from the
main computer.
2. To find the main computer’s MAC, please go to Start > Run on your main
computer, type in cmd and press Enter. At the command prompt, ente
ipconfig/all and press Enter. The MAC will be displayed under Physical
Address.
Click Clone MAC Address
Click Next
If you are visiting the Router
from the main computer,
please select
es
Enter the main computer’s MAC
in the field WAN MAC Address
Click Next
If you are visiting the Router
from another computer, rather
than the main computer, please
select No
To Next Page
Loading...
