Bluetooth 5.0
Nano USB Adapter
Images are for demonstration only.
2 Install Bluetooth Driver1 Connect to a Computer
a. Download the latest driver at
https://www.tp-link.com/download-center.
c. Follow the instructions to complete
installation.
d. Once the process is nished, restart your
computer.
b. Extract the downloaded le and run the
setup.exe to start driver installation.
7106509197 REV1.0.0
b. Insert the adapter into a USB port on your
computer directly.
a. Disable all existing Bluetooth devices (both
built-in and third party) from the Device
Manager on Windows.
Notes:
• TP-Link Bluetooth 5.0 USB Adapter will be listed in the
Device Manager when the driver is installed correctly.
• If the driver installation fails, disable the antivirus software
and firewall, then try again.
• In Windows 7, if a Windows Security message pops up,
refer to https://www.tp-link.com/faq-2760.html.
Tip:
For Windows 10/8.1 system, the driver installation will
automatically start when connected to the internet.
If not, please download the driver manually.
To Next Page
Need help?
General
