TP-Link WPS510U - Configure Wireless Security; Assign Static IP Address to Print Server

5
Configure the Wireless Security
according to your Wireless
Router or Access Point
Click Next
Network device IP address
Router / AP 192.168.1.1
Print server 192.168.1.10
Note
Assign a static IP address to your
Print Server. The IP address should
be within the same subnet of your
Wireless Router or Access Point
Click Next
Note
The IP address of the print server must be within the same subnet with you
r
Wireless Router or Access Point, for example:
Remember the IP address of the Print Server, because you may log into the
Print Server by this IP next time.