Issue Date: 3-11-05 Rev. Date: 9-12-07 Rev. Level: 13 ECN: n/a OIPM P/N: 3420433
Page 8 of 8
FILTER
NOZZLES
Filter maintenance requirements will chan
changing water conditions. The filter should be
inspected frequently and changed as needed. A
dirty filter will restrict water flow to the pump and
can cause permanent damage.
The fog or spray pattern exiting from the nozzles
should have an even cone shape
case, the nozzle should be cleaned or replaced.
Nozzle function should be checked regularly to
assure best misting and evaporation performance.
Clogged nozzles can be cleaned by removing them
from the misting hub and soak
lime removing solution. If nozzles fail to work after
cleaning, replace them with spare nozzles provided.
Tighten nozzles by hand only.
Before reinstalling nozzles, flush water line to
misting hub.
ELECTRICAL SHOCK
HAZARD
• Serious injury or death may
occur.
• Disconnect from electrical
supply before performing
any maintenance operations.
SYSTEM DRAIN / STORAGE
When it is time to store the Power Mister or take it
out of us
e for more than a few days, it is strongly
recommended that the water be drained from the
system to prevent calcification problems and the
formation of algae. Also be sure to empty the Igloo
cooler.
Regularly clean the mister and Igloo cooler with an
anti-bacterial solution.
TPI Corporation’s Guaranteed Customer Satisfaction Warranty States:
If you are ever dissatisfied with the quality of our
workmanship or in the design or
function of our equipment, you may return it to us for repair, replacement, or credit at our
discretion. A returned goods number will be issued at the time you contact us. This
number is necessary to assure that you get pr
oper credit for your return. Shipping costs
for returns are at the expense of the customer unless otherwise negotiated.
We want satisfied Customers and will make every effort to satisfy our customers.
IN CASE OF PRODUCT FAILURE:
It shall be the obligation of the owner to furnish to the company the following
information:
1. Model Number and date of manufacture of product involved.
2. Complete description of the problem encountered with product.
SELLER'S LIABILITY
Seller will not be liable for any loss, d
amage, cost of repair, incidental or consequential
damages of any kind, whether based on warranty, contract or negligence, and arising in
connection with the sale, use or repair of the Products. Seller's maximum liability shall
not in any case exceed the c
ontract price for the Products claimed to be defective or
unsuitable.
RETURNED GOODS
Equipment may be accepted for return with in 90 days of shipment, when authorized by
us with our return labels. Request necessary permission and special Return
tion Tags. Currently listed equipment in new and unused condition, and in
factory sealed cartons, may normally be returned for full credit less 25% (minimum
charge $20.00) charge for handling, repacking and restocking, and less transportation
charges both
ways, at net prices prevailing at time of purchase or time of return,
whichever is lower. TPI Corporation, however, reserves the right to refuse any return, at
our discretion, if TPI Corporation is not responsible for error. All special, custom made or
eq
uipment with special finishes, and modified versions of cataloged numbers are not
returnable. All returned merchandise is subject to inspection. Unsalvageable and
damaged merchandise will be credited at salvage value or less costs of repairs.
DAMAGED GOODS
Minimum charge on replacement will be waived if order is accompanied by copy of proof
of claim submitted to carrier. No repair, replacement, or other adjustment by the
customer is authorized by us, unless so stated in writing by our Sales Service
department.
TPI CORPORATION - P.O. Box 4973
Johnson City, TN 37602-4973
(800) 251-0382
To Previous Page
Loading...
Need help?
General
