T+A MP 2500 R - FD 100 Pairing; Device Info

19
FD 100 pairing
menu item

The MP 2500 R can be controlled remotely using the FD 100 bi-directional radio
remote control handset if a Gateway module is installed; this is available as an
optional extra.
When you call up this menu point, the MP 2500 R attempts to create a
connection with the FD 100 radio remote control.


The menu item is only visible, if a gateway module is installed.
Device Info
menu item
At this menu point you will find information on the status of the installed software
and the factory reset.
Sub-point
Update
At this point it is possible to initiate a firmware update. The update can be
accessed from an Internet connection.
Sub-point
Update package
This point displays the currently installed software package.
Sub-point
Control
Display of the control software version
Sub-point
Client
Display of the Streaming Client software version
Sub-point
DAB / FM
Display of the tuner software version.
Sub-point
Decoder
Display of the CD mechanism decoder software
Sub-point
Bluetooth
Display of the Bluetooth module software
Sub-point
Default settings
Calling up and confirming this menu point erases all personal settings, and
restores the machine to the state as delivered (factory defaults).