T+A MP 2500 R - Page 71

71
Connections
Analogueue outputs
asymmetric co-axial (RCA)
2,2 V
eff
/ 50 Ohm
symmetric (XLR)
4,4 V
eff
/ 50 Ohm
Output digital
1x coax, IEC 60958 (LPCM)
Digital inputs
4x S/P-DIF: 2x standard coax (192 kSps /24 bit) and 2x optical TOS-
Link (96 kSps /24 bit)
1x USB: Device-Mode - up to 384 kSps / 32 bit (LPCM) and DSD512*,
supports asynchronous data transfer.
2x USB master-mode for USB-mass storage devices (USB stick or
VFAT formatted harddisc)
* DSD256 and DSD512 only with a Windows PC with appropriate driver
installed.
D/A-Converter
Double-Differential-Quadruple-Converter with 4 D/A converters per
channel, 32-Bit Sigma Delta, 352,8 kSps / 384 kSps.
Upsampling
Programmable Digital Signal Processor with 4 selectable oversampling
algorithms: FIR short, FIR long, Bezier/IIR, Bezier
Analogueue filter
Phase-linear Bessel filter 3
rd
order, switchable 60…120 kHz (according
to sample rate)
Frequency response
PCM 44.1 kSps: 2 Hz - 20 kHz
PCM 48 kSps: 2 Hz - 22 kHz
PCM 96 kSps: 2 Hz - 40 kHz
PCM 192 kSps: 2 Hz - 80 kHz
PCM 384 kSps: 2 Hz - 100 kHz
DSD 64: 2 Hz - 44 kHz
DSD 128: 2 Hz - 60 kHz
DSD 256: 2 Hz - 80 kHz
DSD 512: 2 Hz - 100 kHz
Total harm. distortion
< 0.001 %
Signal : noise ratio, A-weighted:
110 dB
Channel separation
110 dB
Power requirement
100 - 240 V~ , 50-60 Hz
Power consumption
max. 40 W
Standby < 0,5 W
Dimensions
8,2 x 46 x 40 cm (H x W x D)
Accessory
Infrared remote control FM1000, W-LAN aerial, RCA cord, XLR cord,
power cord, R2-Link-Cable, user manual
We reserve the right to alter specifications.