BLUE M
Blue M - - DC 146 Series Industrial Ovens, Models DC, DCW, DCI, DCC
Page 55
Blue M PRO-750 Controller: (or Yokogawa UP750)
The Blue M PRO-750 Controller is a profiling type, 1/4 DIN controller with the following main features. Please
note that all features may not be used.
Two Channel
Program Capacity: 300 Profiles, 99 Segments per Profile,
Maximum of 3,000 Segments
Program and Local (Single Setpoint) Control
1 Process Input: Type J Thermocouple
1 Heat Control Output: Time Proportioned
7 Digital Inputs
7 Digital Outputs
Communications: RS-485 with Modbus Protocol
Support for Light Loader - LL100 PC-based Parameter Setting Tool
Watlow F4 Controller:
Temperature conditions may be controlled with the optional Watlow F4 Controller. The WF4 is a powerful ¼
DIN profiling type controller with the following features.
Single Channel
Profiling: Forty Profiles, 256 Steps
Automatic & Manual Control
1 Input: Universal Type (RTD is Std.)
4 Digital Inputs
2 Auxiliary Analog Inputs - Optional
2 Control Outputs: Time Proportioned, On/Off, or 4-20 ma
2 Alarm Outputs
8 Digital Event Outputs
2 Retransmit Outputs - Optional
Communications: EIA-232 and EIA-485 with Modbus RTU protocol
BLUE M PRO-750
WATLOW F4
To Next Page
Loading...
