Tracer SimRacer - Advanced PC and Console Functions; PC Product Test and Driver Uninstall; Switch Platform Connection; Xbox Series X Platform Setup

To Next Page

To Previous Page

Tracer SimRacer 6in1

Instructions for use

Note: The installation path and method may vary depending on the system. Please refer to

the computer prompt.

6.5.3 Product Test

1. Enter the test screen, and test the buttons and shafts respectively. The device test

should be performed in the Control Panel under the Devices and Printers tab in the

steering wheel settings

2. Axis can be corrected on the correction interface.

3. Enter the vibration interface by shaft or foot pedal (left and right) test.

6.5.4 Uninstalling the Driver

1. Start Control Panel programs and functions.

2. In the Uninstall or Change a Program window, locate the driver name that you want to

delete and click Delete as prompted To uninstall the VM.

Note: The uninstall method varies according to the system.

6.6 SWITCH Platform Functions

1. Connect the USB main line of the steering wheel to the USB port of the host seat

equipped with the SWITCH host, and turn on the power of the host.

2. Or connect the steering wheel USB main line directly to the SWITCH host through a

Type-C conversion cable.

3. After the connection is successful, the red indicator on the steering wheel keeps on,

and a channel is automatically allocated to the steering wheel. Perform related opera-

tions on the console or enter the game.

4. Tap the SHARE/9/VIEW/- and OPTIONS/10/MENU/+ keys at the same time to take a

screenshot.

5. After connecting the shift lever, it can be automatically converted and locked into steer-

ing wheel mode, which can only be enabled with game support and does not exist in

the game. Vibration and audio capabilities.

Note: This platform game currently does not support the function of 6+1 shift lever, so it is

better not to use shift lever.

6.7 XBOX Series X Platform Functions

1. Insert the matching pedal wire and shift pole wire into the corresponding interface of

the steering wheel and connect the original XBOX Series X handle. The TYPE-C USB

cable should be inserted into the steering wheel’s boot USB port for guidance (the boot

handle should be turned o󰀨).

2. Power on and start the XBOX Series X, and insert the main steering wheel into the USB

of the XBOX Series X. The interface.

3. After successful boot, the LED on the steering wheel will light up and the indicator on

the XBOX Series X boot handle will also light up. At this point, you can perform related

operations on the host or enter the game.

4. During operation, press the HOME button on the steering wheel once (equivalent to the

navigation button on the original handle) to return to the main interface. Or hold down

the HOME button for 1 second to enter the shutdown setting screen.