Tracer SimRacer - Xbox Series S and Troubleshooting; Xbox Series S Platform Setup; Troubleshooting Common Issues; Precautions and Disposal

21
Tracer SimRacer 6in1
EN
Instructions for use
5. On the Home screen, press Y on the steering wheel once to enter the Quick search
page.
6. After connecting the shift lever, it will be automatically converted to the steering wheel
protocol mode, without vibration and audio function in the game.
6.8 XBOX Series S Platform Functions
1. Insert the matching pedal wire and shift pole wire into the corresponding interface of
the steering wheel and connect the original XBOX Series S handle. The TYPE-C USB
cable should be inserted into the steering wheel’s boot USB port for guidance (the boot
handle should be turned o󰀨).
2. Power on and start the XBOX Series S, and insert the main steering wheel into the USB
of the XBOX Series S. The interface.
3. After successful boot, the LED on the steering wheel will light up and the indicator on
the XBOX Series S boot handle will also light up. At this point, you can perform related
operations on the host or enter the game.
4. During operation, press the HOME button on the steering wheel once (equivalent to the
navigation button on the original handle) to return to the main interface. Or hold down
the HOME button for 1 second to enter the shutdown setting screen.
5. On the Home screen, press Y on the steering wheel once to enter the Quick search
page.
6. After connecting the shift lever, it will be automatically converted to the steering wheel
protocol mode, without vibration and audio function in the game.
7. Troubleshooting
1. When the steering wheel is plugged into the main engine and the mode light is not on,
please reinsert it or check whether the guide handle can work normally.
2. When the steering wheel does not respond and the host screen does not move, the
host may crash unexpectedly. Please restart the host.
3. When the steering wheel is not operated properly in the game, please re-insert the
steering wheel and connect it again, especially if the mode is changed. You need to exit
the game and re-enter it.
4. When connecting the boot handle, you must turn o󰀨 the boot handle to prevent the boot
failure caused by the connection between the handle and the host.
5. Since the programming function has memory, if you feel that the key position is wrong,
please clear it by the above method.
6. If the direction or pedal is not in place or does not return to the center, please calibrate
according to the above calibration method.
8. Precautions
1. Read the instructions carefully before performing operations.
2. Avoid strong vibration and gravity drop.
3. It shall not be disassembled, retted or repaired by itself.
4. Avoid storage in damp, high temperature, lampblack and other places.
5. If you have any questions or suggestions, please contact the distributor or manufac-
turer.