Initial set-up
Checking the pack contents
NOTE
Risk of damage!
If you carelessly open the packaging
with a sharp knife or another sharp
object, the tracker can quickly
become damaged.
−
Be very careful when opening
the packaging.
1.
Takeeach individual part out of
the packaging.
2.
Checkwhethereverythinghas
been delivered.
3.
Check whether individual parts
show any signs of damage. If this
is the case,do not usethe tracker.
Contact the manufacturer.
Installing and charging the
battery
When you unpack the tracker for
the first time, the battery is empty.
Charge it as follows:
1.
Connect the charging plug of the
charging cable to the tracker with
the magnetic chargingport.
2.
Connect the other end of the
charging cable to the USB power
adaptor and then to the power
socket.Alternatively,you can also
connect the charging cable to a
computer.
3.
Charge the tracker for 12 hours.
The red light will blink whilst
charging. When the tracker is fully
charged, the light will turn solid red.
4.
Disconnect the trackerfrom the
charging cable.
To Next Page
Loading...
