TRADESMAN
®
MAGNESIUM SERIES
OWNERS MANUAL
18 Gauge
2” Brad Nailer
Model #8510
CAUTION - FOR YOUR OWN SAFETY
READ YOUR OWNER'S MANUAL THROUGH COMPLETELY AND
CAREFULLY BEFORE ATTEMPTING TO SET-UP OR OPERATE YOUR
NEW AIR TOOL. READ AND UNDERSTAND ALL SAFETY RULES.
Your new Pneumatic Tool is a well built, carefully inspected and versatile
product, capable of giving you many years of dependable service. It comes
complete in one carton with a minimum of final assembly and setup required
by you. When unpacking, be sure to check all packages and packing material
for loose parts before discarding.
NOTICE: On the nameplate of your machine you will find the serial number of
your unit. Record this number on this manual cover for future reference.
SERIAL # __________ MFG. DATE # _________ PURCHASE DATE: __________
POWER TOOL SPECIALISTS, INC. E. WINDSOR, CT 06088 PRINTED IN TAIWAN
“LIMITED” TWO YEAR WARRANTY POLICY
All current model TRADESMAN air tools manufactured by POWER TOOL SPECIALISTS are
warranted to the original purchaser thereof to be free from defects in material used in their
manufacture or workmanship for a period of TWO years from the date of initial retail purchase. Labor
on warranted parts will be covered for a period of ONE year. This warranty does not cover any parts
that have been subjected to misuse, abuse, alteration, overload, accident or normal wear of moving
parts. Any machine or part that is returned to us, together with a sales slip or other proof of date of
initial retail purchase, postage prepaid, will be repaired or replaced without cost if the unit is found
defective. Such repairs or replacement will be made within a reasonable time. (not exceeding 60
days following receipt by POWER TOOL SPECIALISTS)
Only POWER TOOL SPECIALISTS is authorized to perform warranty service to its products.
This warranty gives you specific legal rights. You also have implied warranty rights. In the event you
have a problem with this warranty service or performance, you may be able to go to Small Claims
Court, a State Court or a Federal District Court.
How to Obtain Replacement Parts and Service
The merchandise you have purchased from us has been carefully engineered and manufactured
under POWER TOOL SPECIALISTS rigid quality standards and should give you satisfactory and
dependable operation. However, like all mechanical merchandise, it may occasionally require
adjustment, replacement parts, or maintenance. Should you ever need assistance or parts, please
contact or write your nearest authorized service center or the National Parts & Service Center.
DO NOT RETURN THIS PRODUCT TO THE YOUR LOCAL DEALER
PROVIDE THE FOLLOWING INFORMATION: 6. Do not return the product to us unless you have first
1. Model and serial number found on nameplate. obtained a Return Authorization Number (RA#) and
2. The date and store name from which you ship to address.
purchased your tool. 7. Pack the product in its original packaging or any
3. State briefly the trouble you are having. other secure box so no further damage occurs.
4. Give the specific part numbers and description 8. Enclose a letter inside the package giving us your
found in the manual for all parts you require. name, RA#, address and phone number.
(Not reference number) 9. You must also enclose a copy of your sales receipt.
Replacement parts will be made available at 10. Clearly mark the outside of the package with the
current prices. If requested, prices will be RA #. We will not accept any return without an RA#
quoted in advance. marked on the outside of the package.
5. Requests for warranty service must be 11. Ship the product prepaid to the address given to you
accompanied by dated proof of purchase. by the PTS returns department.
For your nearest Authorized Service Center please:
CALL: WRITE:
1-800-243-5114
Power Tool Specialists, Inc.
INTERNET:
3 Craftsman Road
www.tradesman-rexon.com
East Windsor, CT 06088
To Next Page
General