Traeger TFB42PLF - HOPPER CLEAN-OUT; PELLET CHANGE PROCEDURE; HOT HOPPER SAFETY CAUTION

15
TRAEGERGRILLS.COM
HOPPER CLEAN-OUT
Your Traeger® Grill has a hopper clean-out system that allows you to quickly change from one pellet flavor to another without
making a mess.
Probe 1
Probe
Selector
OFF
ON
375
Smoke
Shut Down Cycle High
1
3
2
4
PLUG APPEARANCE MAY VARY BY REGION.
Turn the Main Power switch to OFF (O) and disconnect
the power cord. If the grill is still hot, allow it to cool
completely.
Unscrew the clean-out door fastener and open it. Pellets
will empty into the container you've placed below. You
might need a spatula or spoon to push the remaining
pellets out of the hopper.
Once the hopper is empty, close the door, replace the
fastener, and refill the hopper with a dierent flavor
of TRAEGER® BRAND HARDWOOD PELLETS.
Place a container large enough to hold the discarded
pellets under the pellet clean-out door.
WARNING! Carefully empty out hopper soon afer
grill use. Pellets may be very hot.
TIP: A clean 19-liter (5-gallon) bucket works great!