EasyManua.ls Logo

Trailer Valet MV PRO - Important Safety Information

Default Icon
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
3
IMPORTANT SAFETY INFORMATION
Failure to heed these warnings may result in personal injury and/or property damage:
1. DO NOT use the MV Pro on slopes and inclines beyond stated limits.
2. DO NOT attempt to use the MV Pro to pull up (nose rst) or to push down (rear rst) an
incline. Always move along an incline with the unit on the lower end of the incline.
3. DO NOT submerge the MV Pro in water (salt or fresh) or leave it in water for prolonged
periods, since this can damage the gears and erode lubricants.
4. DO NOT use your drill on the MV Pro’s high gear.
5. Carefully read all instructions. The operator of the MV Pro must exercise common sense,
caution, and full judgment when assessing situations not covered or cautioned in this
manual.
6. The MV Pro is designed for specic applications only. Trailer Valet will not be responsible
for issues arising from modications made to the device. Do not modify the device or
use the device for any application other than its intended purpose. Do not exceed the
designated weight limits.
7. Stay alert! Do not operate if you are tired. Do not operate the device while under the
inuence of drugs or alcohol. Read prescription warning labels to determine if the use of
prescription drugs may impair your ability to operate the device.
8. As with all devices with moving parts, do not wear excessively loose clothing as it may
become caught, resulting in injury. Tie back and secure long hair.
9. Have a second person guide your trailer’s movements while using the MV Pro to avoid
property damage when necessary, especially in narrow or poorly visible areas.
10. Operators and bystanders should never place any part of their body under or in the path
of any portion of this product or the load being supported or moved.
11. This product must be installed and used in strict accordance with these instructions.
12. Always remember to set the brakes before leaving or if you are having trouble maintaining
control of the trailer.
13. Always read and understand your drill/driver operator’s manual and instructions.
14. Before each use of the MV Pro, check for damaged parts. Carefully inspect the device
for any part that appears to be damaged to determine if the device will operate properly.
Check for alignment and secure mounting of all moving parts. If the device is neither
aligned, secured, or both: DO NOT use the device.
15. When servicing, use only factory replacement parts.
16. Have wheel blocks in place before/after use and ready in case of emergency.
17. Never exceed the maximum rated capacity. Refer to the operating manual or decals on
the product to obtain rated capacity. If uncertain, contact Customer Support at (844)
846-9344 or email: support@trailervalet.com.
18. The MV Pro is designed for vertical loading. Excessive side forces may cause failure and
must be avoided.
19. The use of gloves is recommended while attaching the device to the trailer.
20. The MV Pro is designed for use on solid surfaces. DO NOT use the product on excessively
soft surfaces or muddy terrain as the device will not be able to gain traction. If there is no
traction, despite being on a solid surface, consider shifting more of the weight of your
trailer forward.
SAVE THESE INSTRUCTIONS

Related product manuals