Need help?Do you have a question about the TRAMEX RWS and is the answer not in the manual?
General| Power Supply | 9V battery |
|---|---|
| Applications | Building inspection, moisture detection in walls, floors, and ceilings |
| Measurement Range | 0 to 100 on a relative scale |
| Resolution | 0.1 |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20°C to 60°C |
Describes the Tramex RWS and its purpose as a non-destructive moisture scanner.
Explains the two operating modes: EIFS (Walls) and Roofing.
Details the RWS's electrical impedance measurement principle.
Explains how the RWS detects moisture by measuring impedance.
Covers essential pre-operation checks and setup for the RWS.
Details for Exterior Insulation Finishing Systems mode operation and applications.
Details for Roof mode operation and applications.
Step-by-step guide for conducting moisture surveys in EIFS.
Guidance on understanding moisture readings obtained in EIFS mode.
Discusses calibration and the qualitative nature of EIFS readings.
Locating moisture ingress points within EIFS structures.
Step-by-step guide for conducting moisture surveys on roofs.
Methods for locating and tracing leaks on roof surfaces.
Describes common roof types and their associated moisture issues.
Key items to record during a comprehensive roof moisture survey.
Lists additional tools useful for conducting roof surveys.
Guidelines for proper and efficient usage of the RWS instrument.
Instructions for cleaning and maintaining the RWS.
Details warranty coverage, claims process, and limitations.
User responsibility for establishing safety and health practices.
To Next Page
