13
SKIPPER 5 MOISTURE METER USER GUIDE
• Automatic supply timeout (5 minutes) conserves
battery life.
• Bluetooth connectivity, Tramex Meters App avail-
able to download for iOS and Android
• Supply timeout is automatically extended if a
change in meter reading is detected or if any but-
ton is pressed.
• 10 second bleep warning on instrument sounder
prior to end of supply timeout period.
• Last used scale is memorized at supply timeout
and automatically selected next time ON/OFF
button is pressed. If Bluetooth was selected prior
to the Skipper 5 automatically powering off it will
be restored next time ON/OFF is selected.
• LEDs illuminate for selected scale.
• HOLD/AUDIO button freezes moving coil meter
and LED will flash. HOLD facilitates readings
taken out-of-sight.
• If HOLD/AUDIO was selected prior to supply
timeout, the frozen meter reading is digitally
memorized and restored next time ON/OFF is
selected.
• If the battery voltage is getting low, the three
LEDs flash sequentially for a short period. The
Skipper 5 will continue to operate for some
time but it is recommended that the batteries be
changed as soon as convenient.
To Next Page
Loading...
