Trane 4TWL9048A1000A - Communicating Display Assembly (CDA) Navigation; CDA Menu Structure and Navigation; CDA Menu Functions Overview; Config Menu Options

42
4TWL9048A-SF-1C-EN
Communicating Display Assembly (CDA)
1. External shut down
(Load Shed)
2. Min. Airow
3. Blower on/o delays
4. Custom Airow
5. PFC (Power Factor
Correction)
1. FRC DFT (Forced Defrost)
2. EEV Test
3. Evacuation
4. Drive Diagnostic Test
5. OD Fan Test
TECHNICIAN MENUS
SYSTEM STATUS
XXXXXXXXXXXXXXXX
NAVIGATION
• To enter and exit Technician Menus, press the Up/Down buttons
simultaneously for 5 seconds.
• To return to the Home Screen, press the Up/Down buttons
simultaneously for 5 seconds.
• To return to the top level of any menu, press the Left/Right buttons
simultaneously for 5 seconds.
• After ve minutes of inactivity in the Technician Menu section, the
Home Screen will be displayed. Pressing the Enter button for
5 seconds will increase this time to 20 minutes.
ALERT HISTORY
MENU
ALER
T MENU
CONFIG MENU
CONTROL MENU
MONITOR MENU
The Monitor Menu
displays information on
System status, Drive stats
and the System Tachome-
ter.
The Alert History menu
displays alerts stored over
time. Note that clearing
Alert History will also
clear Active Alerts.
The Alert Menu displays
active alerts.
The Conguration Menu
is where System parame-
ters and options are set
and reported.
The Control Menu
contains a selection of
unit function tests that
are used to verify opera-
tion.