Trane 4TXK6512G1000AA - Drain Pipe Installation and Air Ducting

Cut intake grill for drain pipe
(1) Tools:Knife or Pliers .
(2) Cut the intake grill before installing the drain pipe,Then,pass the drain pipe through the hole .As the
following schematic .
Installing the drain pipe and the connecting pipe
Location of t
(1) When the unit is installed in the ceiling,Installing them as below .
ceiling
drain pipe connecting pipe
Installing the drain pipe and the connecting pipe
(1) When the unit is installed in the ceiling,Installing them as belowdra .n
drain pipe
7 8
Location of the cut After
removal
connecting pipe
Floor