Trane 4TXK6512G1000AA - Page 97

Open the intake grill
(1) Push the embeding switch according to the direction of the arrowhead .(Refer to Fig .1)
(2) Turn into the intake grill according to the direction of the arrowhead .(Refer to Fig .2)
Fig.2
Remove the Side cover
(1) Remove the screw .
(2) Push the Side cover according to the direction of the arrowhead .
(3) Then remove the Side cover .
7 7
Intake grille
Side cover A (Right side) Side cover A (Left side)
Fig.1
screw
Side cover