Need help?Do you have a question about the Trane Airfinity XL IH190 and is the answer not in the manual?
General| Capacity | 190 tons |
|---|---|
| Refrigerant Type | R-134a |
| Compressor Type | Screw |
| Sound Level | 75 dBA |
| Power Supply | 460V/3Ph/60Hz |
Introduction to the manual, safety warnings, and recommendations for unit installation and service.
Detailed explanation of each digit in the unit model number and its meaning.
Procedures for filter installation and supply fan airflow adjustment for optimal performance.
Explanation of airflow measurement options and the installation of the R454B refrigerant leak detector.
Guidelines for gas pipework installation and features for smoke outlets.
Key electrical recommendations, safety warnings, grounding, and connection details.
Information on scroll compressor phasing for correct operation and troubleshooting using blink codes.
Steps for installing the Energy Recovery Module, covering horizontal and downflow configurations.
Detailed steps for preparing and installing the HRW module for both horizontal and downflow setups.
Displays the unit's operational limits in cooling mode, including freecooling area.
Presents the unit's operational limits and parameters in heating mode.
Details on building pressurization control, barometric relief, and fresh air hood installation.
Functionality of the R454B refrigerant leak detector and the unit's response to detected leaks.
Comprehensive checklist for tests and checks before initial unit start-up.
Detailed procedures for the initial start-up of the gas burner, including necessary checks.
Procedures for annual calibration of the refrigerant leak detector to ensure accuracy.
A timetable outlining recommended yearly service activities for unit maintenance.
Specifies the annual calibration requirement for the refrigerant leak detector.
To Next Page