CVHE-SB-32A 3
Setpoints are not being stored, service tests will not work and we are calling many
diagnostics on the CLD.
65 26
Starter Contactor Interrupt Failure Diagnostic when powering up the UCP. 66 27
Starter Dry Run Test Diagnostic upon entering a Starter Dry Run Test. 67 27
Starter Dry Run will not work. 68 27
Starter Fault type 1, 2 or 3 69 27
Stepper motor is humming. 70 27
Surge extended 71 28
Pressure Transducer shift in calibration. Diagnostics will be sensor calibration
related such as sensor failure or oil pressure sensor calibration.
72 28
Rapid Time of Day Scrolling or Date jumps back one day. 73 28
Unit did not Transition diagnostics. 74 28
Tracer Diagnostics e.g., tracer loss of comm with options, starter, etc. as well as
other Tracer related diagnostics.
75 29
Unit Tons Read-out on CLD does not work. 76 29
Unknown diagnostics 1217 informational warning. 77 29
To Next Page
Loading...
Need help?
General
