Trane Horizon OANG Series - Page 23

Figure 19. Unit dimensional data for OAN cabinet with powered exhaust but no ERV, in. (cm)
107.518
(273.1)
10.514
(26.7)
98.000
(248.9)
9.194
(23.4)
2.000
(5.1)
HS/HR
DUCT FLANGE
TYPICAL
109.194
(277.4)
4.501
(11.4)
51.000
(129.5)
HS
39.250
(99.7)
32.217
(81.8)
HS
36.110
(91.7)
244.000
(619.8)
63.597
(161.5)
40.000
(101.6)
HR
35.000
(88.9)
HR
33.346
(84.7)
7.013
(17.8)
278.332
(707)
85.404
(216.9)
244.374
(620.7)
6.500
(16.5)
33.959
(86.3)
46.000
(116.8)
43.000
(109.2)
VS
20.000
(50.8)
VR
10.750
(27.3)
10.750
(27.3)
10.750
(27.3)
10.750
(27.3)
73.500
(186.7)
VS
11.000
(27.9)
VE
76.154
(193.4)
76.500
(194.3)
VE
76.500
(194.3)
VR
10.500
(26.7)
5.500
(14)
37.346
(94.9)
19.000
(48.3)
Unit Clearances, Curb Dimensions, and Dimensional Data
OAU-SVX006E-EN 23
Notes:
• Units with no cooling will have the same
dimensions,
less the condensing section.
• Units with chilled water cooling will have the same
dimensions, less the condensing section, and with an
18 in. (45.7 cm) deep pipe cabinet added.
• Refer to project-specific unit submittals.