Trane MCC Series Owner's Manual

MCC-SVU01A6
1
3
4
6
5
2
10
7
8
11
12
13
9
Control Operation
Infrared Remote Control
Name and function of buttons
1. Infrared Signal Transmitter
Transmits the signal to indoor unit.
2. Temperature Setting Button
TEMP
: Press this button to increase set
temperature.
TEMP
: Press this button to decrease set
temperature.
3. POWER Button
Press this button to start unit operation.
Press this button again to stop unit operation.
4. SWING Button
Press this button to active or in-active swing motor to
distribute airfl ow.
5. AIR FLOW Button
This button has no response function.
6. SLEEP Button
Press this button to control temperature while sleeping
and press this button again to cancel.
7. CLEAN Button
This button has no response function.
8. LAMP Button
This button has no response function.
9. HOLD Button
Press this button to lock the key pad. Press this
button again to unlock.
10. TURBO Button
This button has no response function.
11. TIMER Button
Press this button to set the ON/OFF timer of the unit
operation.
12. FAN SPEED Button
Press this button to select fan speed.
13. MODE Button
Press this button to select system operation mode
which is a sequence as FAN, COOL, DRY and back to
FAN.
MCC-SVU01A_En.indd 6MCC-SVU01A_En.indd 6 4/18/13 5:31:29 PM4/18/13 5:31:29 PM

Trane MCC Series Specifications

General

Brand	Trane
Model	MCC Series
Category	Air Conditioner
Language	English