Trane MCCA 30 2B User Manual

May 2020 (Rev.F)
MCC-SVN01A
Confidential and proprietary Trane information
SAFETY WARNING
Only qualified personnel should install and service the equipment. The installation, starting up, and servicing of
heating, ventilating, and air-conditioning equipment can be hazardous and requires specific knowledge and training.
Improperly installed, adjusted or altered equipment by an unqualified person could result in death or serious injury.
When working on the equipment, observe all precautions in the literature and on the tags, stickers, and labels that are
attached to the equipment.
Aĉ)?5:+<9M
+@ĉ!:2DK D+?L5#+9"5::0E*2ĉ/!E""ĉ5!G!%ą:D&:!
R32 (Hi-Eff) 12,000 - 42,000 Btu/h
R32 (STD.) 18,000 - 60,000 Btu/h
R410A (STD.) 18,000 - 60,000 Btu/h
MCC Series 50 Hz
R410A
R32
R32
Hi-Eff Models
Cooling Only
MCCE 12 2B5
MCCE 18 2B5
MCCE 24 2B5
MCCE 30 2B5
MCCE 36 2B5
MCCE 42 2B5
R32
STD. Models
Cooling Only
MCCE 18 2B
MCCE 24 2B
MCCE 30 2B
MCCE 36 2B
MCCE 42 2B
MCCE 48 2B
MCCE 60 2B
R410A
STD. Models
Cooling Only
MCCA 18 2B
MCCA 24 2B
MCCA 30 2B
MCCA 36 2B
MCCA 42 2B
MCCA 48 2B
MCCA 60 2B
www.ttair.co.th | Tel : 02-385-0728 | E-mail : sales@ttair.co.th | LINE ID : @ttair

Trane MCCA 30 2B Specifications

General

Brand	Trane
Model	MCCA 30 2B
Category	Fan
Language	English

Summary

System Precautions

Warnings

Symbols and warnings indicating potential for death or serious injury during installation.

Cautions

Symbols and cautions indicating potential for injury or property damage during installation.

Indoor Unit Installation

Mounting and Securing

Steps for correctly mounting and securing the indoor unit to the ceiling.

Outdoor Unit Installation

Location Requirements

Guidelines for selecting the best location for the outdoor unit, considering ventilation and noise.

Remote Control Installation

Instructions for mounting the wireless remote control in a suitable location.

Drain Hose Installation

Hose Specifications

Installation Details

Gradient and Insulation

Leak Check and System Evacuation

Leak Check Procedure

Steps for performing a leak test on the refrigerant lines using nitrogen and soap bubbles.

System Evacuation

Process for evacuating the system to remove air and moisture using a vacuum pump.

Refrigerant Charging Procedure

Detailed steps for charging the correct amount of refrigerant into the system.

Electric Wiring

Grounding Requirements

Importance and methods for proper electrical grounding to prevent electric shock.

Wiring Checks and Issues

Wiring Diagram R410A

MCCA 18 2B / MCCA 24-A60 2B

Wiring Diagram R32

MCCE 12-18 2B5 / MCCE 18 2B

MCCE 24 2B5 / MCCE 24 2B

MCCE 30-42 2B5 / MCCE 30-60 2B