Trane MCW524AMUA0 - Operation - Vertical Airflow and Powerful Mode; Adjusting Vertical Airflow; POWERFUL Operation Mode

13
POWERFUL
Operation
POWERFUL operation quickly maximizes the
cooling effect in any operation mode. You can
get the maximum capacity with a touch of a
button.
● Pressing the (POWERFUL) button during
operation starts POWERFUL operation.
● POWERFUL operation ends in 20 minutes.
Then the system automatically operates
again with the settings which were used
before POWERFUL operation.
● During you use “POWERFUL operation”, the
other functions will not go on.
Press .
■■
■■
■ To cancel POWERFUL operation:
1
Notes on POWERFUL operation
● In COOL mode
To maximize the cooling effect, the capacity
of outdoor unit must be increased and the air
flow rate be fixed to the maximum setting.
The temperature and air flow settings are not
variable.
● In DRY mode
The temperature setting is lowered by 5°F
and the air flow rate is slightly increased.
● In FAN mode
The air flow rate is fixed to the maximum
setting.
Display
Press .
ATTENTION
● Be careful when adjusting the louvre. In-
side the air outlet, a fan is rotating at a
high speed.
Adjusting the vertical blade
(louvre)
Adjusting the Air
Flow Direction
Hold the lever and move the louvre.
(You will find a lever on the left-side and the
right-side blades.)
<MCW509AMUA0 • MCW512AMUA0>
<MCW518AMUA0 • MCW524AMUA0>
01EN3P102561-6F.p65 03/06/04, 9:23Page 13 AdobePageMaker6.5J/Win