EasyManua.ls Logo

Trane Precedent THJ102 User Manual

Trane Precedent THJ102
60 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
SAFETY WARNING
Only qualified personnel should install and service the equipment. The installation, starting up, and servicing of heating, ventilating, and air-conditioning equipment
can be hazardous and requires specific knowledge and training. Improperly installed, adjusted or altered equipment by an unqualified person could result in death or
serious injury. When working on the equipment, observe all precautions in the literature and on the tags, stickers, and labels that are attached to the equipment.
December 2022
RT-SVX074A-EN
Installation, Operation, and Maintenance
Packaged Rooftop Air
Conditioners
Precedent™ Cooling and Electric
Heat
High Efficiency
6 to 25 Tons 60 Hz
Model Numbers: THJ072A - THJ300A
Question and Answer IconNeed help?

Do you have a question about the Trane Precedent THJ102 and is the answer not in the manual?

Trane Precedent THJ102 Specifications

General IconGeneral
BrandTrane
ModelPrecedent THJ102
CategoryAir Conditioner
LanguageEnglish

Summary

Introduction to Packaged Rooftop Air Conditioners

Safety Advisories and Precautions

Covers warnings, cautions, notices, PPE, and general safety protocols for handling the equipment.

Model Number Description

Model Number Encoding

Detailed explanation of each digit's meaning in the unit model number for configuration identification.

Dimensions and Weights

Installation Procedures

General Installation Safety and Requirements

Critical safety warnings, general requirements, and procedures for unit placement and securing.

Electrical and Control Wiring

Detailed instructions for main power, low voltage, and control wiring, including safety and configuration.

Pre-Start Procedures

Electrical Checks and Safety

Essential pre-start checks for voltage imbalance, electrical phasing, and hazardous voltage safety.

Unit Start-Up

Compressor and System Startup

Steps for starting up compressors, checking pressures, and verifying system operation like hot gas reheat.

Maintenance

Troubleshooting

Related product manuals