Need help?Do you have a question about the Trane Precedent and is the answer not in the manual?
General| Refrigerant | R-410A |
|---|---|
| Type | Packaged |
| Stages | Single |
| Voltage | 208/230V or 460V |
| Heating Options | Electric or Gas |
Lists options available from the factory for customization and enhanced unit performance.
Details features designed for straightforward installation, routine service, and efficient maintenance.
Highlights the benefits of ReliaTel controls for improved compressor life and unit reliability.
Describes the extensive testing procedures ensuring unit integrity, performance, and durability.
Presents cooling capacity tables across various conditions for different unit sizes.
Provides detailed evaporator fan performance data including RPM, BHP, and ESP.
Details the sound power levels of the units across different octave bands.
Lists heating input, output, and air temperature rise for gas-fired models.
Describes ReliaTel unit controls, zone sensors, and Integrated Comfort™ system.
Explains conventional thermostats and programmable controls for electromechanical units.
Provides electrical data for standard efficiency models, including fan motor requirements.
Details electrical data for high efficiency models, including fan motor requirements.
Lists FLA, LRA, HP, and voltage for evaporator fan motors.
Provides electrical specifications for compressor and condenser motors.
Details wire counts for different zone sensor types and thermostats.
Provides detailed measurements and diagrams for 3 to 5 ton units.
Specifies clearances and typical roof opening dimensions for unit installation.
Illustrates dimensions for various optional accessories like economizers and hoods.
Lists shipping, net, and corner weights along with center of gravity dimensions.
Provides net weights for various factory-installed options.
Covers casing, top, filters, compressors, refrigerant circuits, and coils.
Details specifications for factory options like coils, dehumidification, and controls.
Describes specifications for field-installed accessories like sensors and dampers.
To Next Page