EasyManua.ls Logo

Trane Precedent WSJ300 - User Manual

Trane Precedent WSJ300
48 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
SAFETY WARNING
Only qualified personnel should install and service the equipment. The installation, starting up, and servicing of heating, ventilating, and air-conditioning equipment
can be hazardous and requires specific knowledge and training. Improperly installed, adjusted or altered equipment by an unqualified person could result in death or
serious injury. When working on the equipment, observe all precautions in the literature and on the tags, stickers, and labels that are attached to the equipment.
December 2022
PKGP-SVX010A-EN
Installation, Operation, and Maintenance
Packaged Rooftop Air
Conditioners
Precedent™ Heat Pump
Standard Efficiency
12.5 to 25 Tons 60 Hz
Model Numbers: WSJ150A - WSJ300A
Question and Answer IconNeed help?

Do you have a question about the Trane Precedent WSJ300 and is the answer not in the manual?

Trane Precedent WSJ300 Specifications

General IconGeneral
ModelWSJ300
CategoryAir Conditioner
RefrigerantR-410A
Compressor TypeScroll
Warrantycompressor

Summary

Introduction

Safety Advisories and Warnings

Describes safety advisories, cautions, and notices.

Field Wiring and PPE Requirements

Details safety for electrical wiring and personal protective equipment.

General Information

System Controls and Sensors

Overview of control inputs, zone sensors, thermostats, and temperature sensors.

Pre-Installation

Fiberglass Wool Handling Precautions

Safety measures for working with fiberglass.

Hazardous Voltage and Heater Inspection

Safety warnings and heater element checks.

Clearances

Weights

Lifting and Rigging

Lifting and Rigging Safety Warnings

Safety precautions for lifting and rigging units.

Installation

Safety and General Installation Procedures

Covers safety warnings, horizontal units, and ductwork.

Electrical Power and Wiring Requirements

Covers main power, field wiring, control wiring, and 24 VAC systems.

Pre-Start

Pre-Start Safety Warnings

Safety warnings before starting the unit.

Voltage Imbalance and Phasing Checks

Procedures for checking voltage and phasing.

Unit Start-Up

Maintenance

Hazardous Service Procedures and Monthly Tasks

Safety precautions and routine monthly maintenance.

Coil Cleaning Safety and Procedure

Hazards of coil cleaning and step-by-step cleaning instructions.

Troubleshooting

Limited Warranty

Related product manuals