Trane ProSpace PTEG0901GAA User Manual

40 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

SSAAFFEETTYY WWAARRNNIINNGG

Only qualified personnel should install and service the equipment. The installation, starting up, and servicing of heating, ventilating, and air-conditioning

equipment can be hazardous and requires specific knowledge and training. Improperly installed, adjusted or altered equipment by an unqualified person

could result in death or serious injury. When working on the equipment, observe all precautions in the literature and on the tags, stickers, and labels that

are attached to the equipment.

July 2023

PPTTAACC--SSVVXX000044AA--EENN

ProSpace

™™

Packaged Terminal Air Conditioner (PTAC)

R32 AC/Heat Pump with Electric Heat

208/230 Volts:

PTEG0701GAA

PTHG0701GAA

PTEG0901GAA

PTHG0901GAA

PTEG1201HAA

PTHG1201HAA

PTEG1501HAA

PTHG1501HAA

265 Volts:

PTEG0702GAA

PTHG0702GAA

PTEG0902GAA

PTHG0902GAA

PTEG1202HAA

PTHG1202HAA

PTEG1502HAA

PTHG1502HAA

Installation, Operation, and Maintenance

Table of Contents

Questions and Answers:

K
kyle44Aug 10, 2025
What to do if my Trane ProSpace PTEG0901GAA is losing refrigerant or has a sensor issue?
- K
  Kathleen BrownAug 10, 2025
  If your Trane Heat Pump is losing refrigerant or has a sensor issue: * Inspect the unit, especially the refrigerant system, for leaks or visible damage. * Observe the refrigerant circuit temperatures. * Check that the tube temperature sensor on the condenser coil is snug in its sleeve. * Ensure the ambient temperature sensor in front of the evaporator coil is secure and not touching the coil. * Verify that the inner and outer tube temperature sensors are correctly plugged into the board inside the compartment below the on-board mounted controls and are not reversed.
J
John GoodAug 16, 2025
What to do if the outlet air temperature sensor fails in my Trane ProSpace PTEG0901GAA Heat Pump?
- J
  Janet HoodAug 16, 2025
  If the outlet air temperature sensor fails in your Trane Heat Pump: 1. Check the sensor wiring and connections to the main board. 2. Test the resistance of the sensor while it is disconnected. 3. If needed, replace the main board.
R
Roberto FletcherAug 21, 2025
What to do if the indoor ambient temperature sensor is open or short-circuited in my Trane Heat Pump?
- S
  Samantha CurtisAug 21, 2025
  If the indoor ambient temperature sensor is open or short-circuited in your Trane Heat Pump: 1. Check the sensor wiring and connections to the main board. 2. Test the resistance of the sensor while disconnected. 3. Replace the main board if needed.
O
Olivia SummersAug 27, 2025
What to do if the indoor coil tube temperature sensor is open or short circuited in my Trane ProSpace PTEG0901GAA Heat Pump?
- L
  lhansonAug 27, 2025
  If the indoor coil tube temperature sensor is open or short-circuited in your Trane Heat Pump: 1. Check the sensor wiring and connections to the main board. 2. Test the resistance of the sensor while disconnected. 3. Replace the main board if needed.
C
carlhayesSep 2, 2025
What to do if the outdoor coil tube temperature sensor is open or short circuited in my Trane ProSpace PTEG0901GAA?
- J
  julie16Sep 2, 2025
  If the outdoor coil tube temperature sensor is open or short-circuited in your Trane Heat Pump: 1. Check the sensor wiring and connections to the main board. 2. Test the resistance of the sensor while disconnected. 3. Replace the main board if needed.

Trane ProSpace PTEG0901GAA Specifications

General

Brand	Trane
Model	ProSpace PTEG0901GAA
Category	Heat Pump
Language	English

Summary

Warnings, Cautions, and Notices

Safety Advisories and Definitions

Describes the types of warnings and their meanings.

Specific Hazard Warnings

Covers PPE, fire, safety, and EHS precautions.

Health Hazard Warnings

Model Identification

Model Number Breakdown

Electrical Connections

Power Supply and Wiring

Covers voltage, grounding, and wiring for safe electrical connection.

Electrical Wiring Diagrams

Schematics for Unit Models

Provides detailed wiring diagrams for various unit configurations and voltages.

Installation Procedures

Wall Sleeve and Grille Installation

Chassis Installation into Sleeve

System Configuration

Air Direction and DIP Switch Settings

Keypad Configuration and Settings

Auxiliary Controls

Thermostat and Energy Management Wiring

Unit Operation

Control Panel Functions and Display

Unit Mode Operations

Remote Control Operation

Service and Troubleshooting

Service Safety and PPE Requirements

Highlights critical safety warnings and PPE requirements for servicing the unit.

Unit Disassembly Procedures

Step-by-step guide on how to safely disassemble the unit for maintenance or repair.

Troubleshooting Error Codes and Malfunctions

Lists digital display error codes, their explanations, and troubleshooting steps.

Malfunction Causes and Solutions

Provides a table of common malfunctions, their causes, and recommended solutions.

Technician Guidelines and Resources

Related product manuals

Preview: Trane ProSpace PTEG0701GAA

Trane ProSpace PTEG0701GAA

Trane ProSpace PTEG1501HAA

Trane ProSpace PTHG0901GAA

Trane ProSpace PTHG1201HAA

Trane ProSpace PTHG0902GAA

Trane ProSpace PTHG1502HAA

Trane LIFT 81-P

Preview: Trane LIFT 162-P-1204-P

Trane LIFT 162-P-1204-P

Preview: Trane XR15

Preview: Trane 4TWR4

Preview: Trane TTA Series

Trane TTA Series