Trane S8X1B060M3PSAA - User Manual

SSAAFFEETTYY WWAARRNNIINNGG
Only qualified personnel should install and service the equipment. The installation, starting up, and servicing of heating, ventilating, and
air-conditioning equipment can be hazardous and requires specific knowledge and training. Improperly installed, adjusted or altered
equipment by an unqualified person could result in death or serious injury. When working on the equipment, observe all precautions in the
literature and on the tags, stickers, and labels that are attached to the equipment.
January 2019
1188--CCEE0044DD11--11BB--EENN
Upflow/Downflow/Horizontal
Gas-Fired, 1–Stage and 2–Stage Induced Draft
Furnaces with High Efficiency Motor
UUppffllooww,, DDoowwnnffllooww,, HHoorriizzoonnttaall RRiigghhtt//LLeefftt
Single Stage
S8X1A026M2PSAA
S8X1A040M3PSAA
S8X1B040M2PSAA
S8X1B060M3PSAA
S8X1B060M4PSAA
S8X1B080M4PSAA
S8X1C080M5PSAA
S8X1C100M5PSAA
S8X1D120M5PSAA
Two Stage
S8X2A040M3PSAA
S8X2B060M3PSAA
S8X2B060M4PSAA
S8X2B080M4PSAA
S8X2C080M5PSAA
S8X2C100M5PSAA
S8X2D120M5PSAA
S8X1
S8X2
NNoottee:: This installer’s Guide is used for multiple furnace families. Models
may have a “T” in the 12th digit designating they meet California less
than 40 ng/J (NOx) emissions requirements.
NNoottee:: Graphics in this document are for
representation only. Actual model may
differ in appearance.
18-CE04D1-1A-EN
Installer’s Guide

Trane S8X1B060M3PSAA Specifications

General

Model	S8X1B060M3PSAA
Category	Furnace
Type	Gas
Efficiency Rating	High Efficiency
AFUE	80%
Heating Capacity	60, 000 BTU
Input BTU	60, 000 BTU
Output BTU	48, 000 BTU
Fuel Type	Natural Gas
Stages	Single Stage
Ignition Type	Hot Surface Ignition
Warranty	20-Year heat exchanger warranty; 5-year parts warranty (upon registration changes to 10 year)

Summary

Safety Warnings and Cautions

Fire, Explosion, and Electrical Hazards

Carbon Monoxide Poisoning Hazards

Furnace Installation Guidelines

Safety Practices and Precautions

Essential safety rules for installation and servicing.

Furnace General Installation

Gas Piping

Upflow and Downflow Piping

Diagrams for connecting gas supply in upflow/downflow.

Gas Valve Adjustment

General Venting Requirements

Duct Connections

Supply Duct Connections

Return Duct Connections

Electrical Connections

Field Wiring Diagrams

Wiring diagrams for single and two-stage thermostats.

General Start-up and Adjustment

Preliminary Inspections

Control and Safety Switch Adjustment

Checking and adjusting safety controls like limit switches.

Furnace Combustion Air Exhaust Options

Upflow Application Venting Options

Integrated Furnace Control Menu

SBX1 Single Stage OD Control Menu

Guide to navigating the control menu for single-stage operation.

Setting Airflow

Airflow vs. External Static Pressure

Table correlating airflow (CFM) with external static pressure.

Integrated Furnace Control Display Codes

Menu Options and Error Codes

Sequence of Operation

1 st Stage Gas Heating Sequence