2. Mount the ground cable as shown in
Illustration 3.8.
Illustration 3.8 Mounting the Ground Cable
3. Insert the mains cables to the mains plug and
tighten the screws as shown in Illustration 3.9.
Illustration 3.9 Mounting the Mains Plug
4. Mount the support bracket across the mains
cables and tighten the screws as shown in
Illustration 3.10.
Illustration 3.10 Mounting the Support Bracket
Relays and terminals on enclosure size H10
Illustration 3.11 Enclosure Size H10
IP20, 600 V, 11–15 kW (15–20 hp)
Installation
12
08/2020 All rights reserved.
BAS-SVX58D-EN
3
To Next Page
Loading...
