Need help?Do you have a question about the Trane TR1 Series VFD and is the answer not in the manual?
Warning about dangerous voltages. Wait 15-30 min after power off. Only qualified electricians should install.
Components sensitive to Electrostatic Discharge (ESD). Use proper ESD equipment during service.
User must ensure proper grounding, motor overload, and branch circuit protection.
Details the terminals, function, and rating for the auxiliary relay option card output.
Lists terminals, function, and rating for standard relay and analog outputs on the TR1 VFD.
Visual steps 1-3 for NEMA 1 installation, including a high voltage DANGER warning.
Instructions for positioning, securing, and tightening the option card in the NEMA 1 cassette.
Steps 5-6 for connecting ribbon cables and terminal strips in the NEMA 1 enclosure.
Visual steps 1-2 for NEMA 12 installation, including a high voltage DANGER warning.
Steps 3-5 for securing the card and connecting cables for NEMA 12 installation.
Instructions for wiring the option card to drive from TR1 VFD Relay 2 and parameter settings.
Instructions for wiring the option card to drive from Analog Output 42 and parameter settings.
Instructions for wiring the option card to drive from Analog Output 45 and parameter settings.
To Next Page
General
