10
BAS-SVU24G-EN
Figure 5. Device Navigation Tree pane showing the System Controller and its network devices
3. Right-click the device you want to work with on the tree and select CCoonnnneecctt ttoo DDeevviiccee.
The Unit Summary screen for that device appears as shown in Figure 6, p. 11. (It may take the
Balancing Tool a minute or two to download and populate the screen with the point values).
You can navigate to any of the other Balancing Tool screens (Flow Calibration, Unit
Configuration, Alarm, and Controller Status) by clicking the tabs along the top of the screen
or selecting them from the Utilities menu. (See the Tracer TU Balancing Tool Help for detailed
descriptions of these screens.
DDeevviiccee CCoonnnneeccttiioonnss
To Next Page
Loading...