BAS-SVU24G-EN
15
The Water Valve Override Dialog Boxes
The Water Valve Override dialog boxes appear when you click the Hot Water Valve Override,
Chilled Water Valve Override, Isolation Valve Override, or the Economizer Valve Override SSttaarrtt
button in the Actions box on the Flow Calibration screen. You can use these dialog boxes to
override these water valves Open or Closed for a limited duration. Click AAppppllyy to override the
water valve to Open while keeping the dialog box open. Click SSaavvee to start the override and close
the dialog box.
Figure 10. The Hot Water Valve and Economizer Valve Override dialog boxes
The standard default time duration is 4 hours on all of these override dialog boxes. If you wish to
release the override manually, you can select RReelleeaassee and click AAppppllyy or SSaavvee.
NNoottee:: You can override the hot water valve, chilled water valve, economizer valve, or isolation
valve on multiple devices using the Facility View. (See “Facility View,” p. 16.)
The Ventilation Override Dialog Box
The Ventilation Damper Override dialog box appears when a blower coil, fan coil, or unit
ventilator is configured with an outside air damper. You can temporarily override the outside air
damper 'Open' to an adjustable percentage.
Figure 11. The Ventilation Damper Overrides dialog box
Ventilation Damper Override
Ventilation Damper
BBaallaanncciinngg TTooooll DDiiaalloogg BBooxxeess
To Next Page
Loading...