18
BAS-SVU24G-EN
• Override some points included in the Facility View equipment point groups.
NNoottee:: When viewing and working with dual duct VAV units, in the Facility View, be aware
that Air Flow Setpoint Active cannot be overridden due to a priority conflict.
• Calibrate the air valves of all selected VAV boxes using the VAV Balancing view.
In addition, Facility View performs the following operations:
• Releases overrides to automatic control for all override cases.
• Displays information pertaining to all members of a group on a status page.
• Saves the Facility View layout so each time Facility View is opened the existing views are
displayed.
FFaacciilliittyy VViieeww
To Next Page
Loading...