Need help?Do you have a question about the Trane TUD100 and is the answer not in the manual?
General| Model | TUD100 |
|---|---|
| AFUE | 80% |
| Ignition Type | Hot Surface Ignition |
| Warranty | Limited Lifetime on Heat Exchanger, 5-Year Limited on parts |
| Type | Upflow |
| Efficiency Rating | 80% |
| Blower Motor Type | PSC |
| Fuel Type | Natural Gas or Propane |
| Vent Type | Category I |
| Stages | Single Stage |
Details certification by AGA and CSA for natural and L.P. gas.
Describes solid-state devices monitoring flame presence and dual solenoid gas valve.
Highlights durable, heavy gauge aluminized steel heat exchanger for heat transfer.
Mentions multi-port In-shot burners for quiet and efficient service, convertible to L.P. gas.
Explains total control of furnace limits, blowers, gas valve, and self-diagnostics.
Covers 4-speed blower motor, switching speeds for heating/cooling, and blower door safety switch.
Describes heavy gauge steel, wrap-around cabinet, and foil-faced fiberglass insulation.
Details adaptive Hot Surface Ignition, elimination of pilot, and front service access.
Lists essential components like multi-port burners, solid-state control, and aluminized steel heat exchanger.
Encompasses items like thermostats, electronic air filters, and coil enclosures.
Presents detailed technical specifications for various furnace models in a tabular format.
Provides data on furnace airflow (CFM) against static pressure in inches w.g.
Displays cubic feet per minute (CFM) based on temperature rise.
Illustrates wiring connections for heating-only furnace operation.
Shows wiring for single-stage heating and cooling configurations.
Wiring diagram for twin furnaces with a heating-only thermostat.
Wiring diagram for twin furnaces with a heat/cool thermostat.
Shows the physical dimensions of the furnace models.
Specifies required clearances for safe installation.
Presents electrical schematic diagrams for the gas furnaces.
Details speed tap settings for the induced draft fan motor.
To Next Page