BASIC
PROCEDURES
Start-up begins with four simple steps:
1. Find a comfortable, well-lit spot to
sit down with the Home Comfort Sensor and this
manual. (Relaxing in an easy chair is the most
comfortable way to meet new challenges.)
2. Remove the front of the Home Comfort
Sensor from its mounting bracket. On the back
side you’ll see the batteries on the left edge.
Remove the plastic insulating strip from between
the batteries. The Home Comfort Sensor will then
begin operating after a short delay.
Now you can adjust your setpoint and set the
clock right from the comfort of your easy chair.
3. This sensor has a back lit display. This will
help you see the LCD if the lighting is dim. It is
activated by pressing one of the keys on the key
pad and will be on for approximately 25 seconds.
4. Read on.
Ready, Set…Relax.
4
To Next Page
Loading...
