EasyManua.ls Logo

Trane PolyTherm ARTC-SVX005A-EN - User Manual

Trane PolyTherm ARTC-SVX005A-EN
80 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
February 2021
ARTC-SVX005A-EN
SAFETY WARNING
Only qualified personnel should install and service the equipment. The installation, starting up, and servicing of
heating, ventilating, and air-conditioning equipment can be hazardous and requires specific knowledge and training.
Improperly installed, adjusted or altered equipment by an unqualified person could result in death or serious injury.
When working on the equipment, observe all precautions in the literature and on the tags, stickers, and labels that are
attached to the equipment.
PolyTherm™ Simultaneous
Chiller/Heater
Installation, Operation, and Maintenance

Table of Contents

Questions and Answers

  • W
    wroachAug 5, 2025
    What to do if the phase monitor does not energize on my Trane Temperature Controller?
    • J
      James BradshawAug 6, 2025
      If the phase monitor of your Trane Temperature Controller doesn't energize and the LED glows red, check the wiring of all three phases, the voltage, and the phase sequence. If necessary, swap any two line voltage connections at the mounting socket.

Trane PolyTherm ARTC-SVX005A-EN Specifications

General IconGeneral
BrandTrane
ModelPolyTherm ARTC-SVX005A-EN
CategoryTemperature Controller
LanguageEnglish

Related product manuals