17
Option 3 – Ethernet Connection:
1. Plug the Ethernet cord into the Ethernet port on the back of the
BOHA!
®
WorkStation.
2. When the connection is complete, the Network LED on the
BOHA! WorkStation front panel will change to solid green.
3. The BOHA! WorkStation is now ready for operation.
If your tablet’s Wi-Fi is not on the same subnet as your Ethernet connection,
BOHA! Ops will not be able to discover BOHA! WorkStation as defined in
Step 2 of Printing a Label on page 23.
Perform the following steps in BOHA! Ops to complete the setup if you
are not able to discover the BOHA! WorkStation:
1. Print a summary of the network configuration on BOHA! WorkStation.
Press the Bluetooth button
for two seconds and release.
2. Open BOHA! Ops on your tablet.
3. Select Settings from the Menu.
4. Select Labeling.
5. Toggle on Connect Using IP.
6. Enter the IP address from the printed network summary label in the
IP Address field and select Connect.
7. The BOHA! WorkStation is now ready for operation with your tablet.
NETWORK CONNECTIONS
To Next Page
Loading...