What to do if the red annunciator is blinking on my TransAct DR5000?
If the red annunciator is blinking on your TransAct Touch terminals, it indicates that communication has been lost with the SA3000 Door Controller Unit. Ensure that the SA3000 Controller Unit is properly configured for Serial Readers by selecting SE3- CS/ CSPP/RDR100 in the Serial Reader(s) option.
Step-by-step instructions for installing the DR5000 reader, including trim plate usage.
Explains the optical tamper sensor and how it reports removal from the mounting surface.
Covers monthly testing procedures to verify reader operation and card read range.
Diagnosing why the power indicator behind the Transact logo remains off when power is applied.
Troubleshooting red annunciator flashing, indicating lost communication with the controller.
Steps to check when no annunciator turns on after a contactless card is tapped.
General| Brand | TransAct |
|---|---|
| Model | DR5000 |
| Category | Touch terminals |
| Language | English |
To Next Page
