6
VI. Display Information
Digital display screens
1. Weight
There are 5-1/2 digits in total to display the weight on the tray.
2. Unit weight
There are 5-1/2 digits in total to display the unit weight.
3. Pieces
There are 6 digits to display the quantity of the parts on the tray.
Annunciators ( “ ”)
1. TARE: indicates the weight of the goods without packaging;
2. ZERO: indicates that the scale is at a zero condition;
3.
：
If this symbol does not appear, it means that the battery is fully charged. If
this symbol appears, it means that the battery voltage is too low and it needs to be
recharged. When the back lighting shuts off and the scale displays “LO BAT”, it
means that the battery has been exhausted to its limit and will be damaged if used
any longer. When this occurs, you must switch off the scale and then recharge the
battery immediately;
To Next Page
Loading...