Transferring Music︱
Music playback is disabled while the MP300 is connected to a computer. Please disconnect your MP300
from the computer when you want to use the player.
NEVER plug the MP300 into a USB hub or an external USB port located on a keyboard,
monitor or other peripheral. This may cause damage to your MP300. When connecting to a
computer, Please plug the MP300 directly into your computer’s built-in USB port.
1. Plug the small end of the USB cable into the Mini USB port on the side of the MP300, and plug the large
end of the cable into an available USB port on your desktop or notebook computer.
2. When connected to a computer, the MP300’s red LED will illuminate, indicating that its internal battery is
charging.
Music playback is disabled while the MP300 is connected to a computer.
3. In Windows®, an “MP300 DISK” with a newly assigned drive letter will appear in the My Computer
window under Devices with Removable Storage. For Mac users, a new USB volume called “MP300”
will appear on the OSX desktop and in the Finder window under “DEVICES.”
To Next Page
Loading...
Need help?
General
