LED Status Definition
Flashing Recording
Flashing Recording with Wi-Fi on
4. Recording Videos
To start recording, long press the button; you will hear 1 beep, and the red LED light of the
recording indicator will flash during recording. To activate Wi-Fi, long press the button while
recording, and the LED light will flash from red to blue. To stop recording, long press the button
again; you will hear 1 beep. The red LED light will then turn off. One video file is saved for every 3
minutes of recording.
Note: The DrivePro Body 20 stops recording when connected to the computer.
To Next Page
Loading...
