Do you have a question about the Transition Networks SGFEB1013-120 and is the answer not in the manual?
Product Type | Media Converter |
---|---|
Model | SGFEB1013-120 |
Humidity | 5% to 90% (non-condensing) |
Data Transfer Rate | 1 Gbps |
Form Factor | Desktop |
Operating Temperature | 0 to 50 °C |
Storage Temperature | -40 to 70 °C |
Interfaces/Ports | 1 x RJ-45, 1 x LC |
Media Type Supported | Fiber optic, Twisted pair |
Fiber Mode Supported | Multi-mode |
Maximum Distance Supported | 550 m |
Management | Unmanaged |
Ports | 1 x 10/100/1000Base-T - RJ-45, 1 x 1000Base-SX - LC |
Lists media converter part numbers with corresponding copper and fiber-optic port specifications.
Details the function of each of the six positions on the media converter's DIP switch.
Explains auto-negotiation, speed, duplex, and LPT settings for the copper connection.
Explains the AutoCross feature and how to configure the jumper for cable type.
Instructions for connecting the AC power adapter to the media converter.
Diagrams illustrating the locations of Port 1 and Port 2 on the media converter.
Steps to connect the 10/100/1000Base-TX compliant copper cables.
Procedure for connecting the 1000Base-X compliant fiber optic cables.
Explanation of the status LEDs for monitoring media converter operation.
Overview of Auto-Negotiation and Link Pass-Through.
Discusses cable length determination in full-duplex networks.
Details Half-Duplex rules, Pause, AutoCross, and Link Restoration features.
Lists requirements for fiber and Category 5 copper cables.
Lists IEEE standards, dimensions, weight, power, and environment specs.
Details product warranty and includes laser safety cautions.
Troubleshooting steps based on the status of Power, Duplex, LACT, and Speed LEDs.
Provides contact details, online support, company address, and declaration of conformity.
Details FCC, Canadian, European regulations, CE Mark, and safety warnings.
States trademark ownership and copyright restrictions for the document.