To Next PageTo Next Page
Need help?Do you have a question about the Transonic 400 Series and is the answer not in the manual?
Safety and handling guidelines for research consoles and modules.
Specific safety precautions for perivascular flowprobes and tubing flowsensors.
Safety considerations for compatible pressure transducers.
Essential rules for safe electrical use of the equipment.
General introduction to the Transonic 400-Series consoles and modules.
Description of console capacity and compatible module types.
Overview of T402 (Four-Bay) and T403 (Six-Bay) consoles.
Guidelines for cleaning and maintaining the console.
Details on the back panel components, including power, outputs, and labels.
Details on console dimensions, weight, and module capacity.
Information on power input, grounding, and fuses.
Explanation of console-to-module connection and signal outputs.
Procedures for installing and removing modules from the console.
Explanation of timing synchronization between modules.
Details on sequential triggering and testing for cross-talk.
Description of compatible ME-PXL and ME-PXN tubing flowsensors.
Overview of the TS410 module's features for flow measurement.
Detailed explanation of the TS410 front panel layout and controls.
Description of the different operational modes of the TS410 module.
Guidance on selecting filter settings for flow recording.
Details on the back panel analog output signals from the TS410 module.
Covers general features, compatibility, and sensor connectors.
Details on digital/analog displays and signal output characteristics.
Covers operational technology, filters, calibration, and synchronization.
Steps for initial setup and connection of the TS410 module.
Procedure for adjusting the zero offset of the flow sensor.
Instructions for adjusting the sensor calibration gain.
Steps to calibrate the data acquisition system.
Explanation of how to navigate and use the TS410 program menu.
Details on setting up and managing alarms.
Instructions for using clamp-on tubing flowsensors.
Details on site selection, preparation, application, and cleaning.
Instructions for using inline tubing flowsensors.
Lists and describes compatible perivascular flowprobe series.
Description of the TS420 module's front panel layout and controls.
Explanation of the TS420 module's different operational modes.
Details on filter settings and analog output signal characteristics.
Information on using calibration keys with TS420 flowprobes.
Covers general features, probe compatibility, and connectors.
Details on digital/analog displays, signal outputs, and frequency range.
Covers technology, controls, filters, calibration, and synchronization.
Steps for setting up and connecting the TS420 module.
Procedure to test the signal quality of the perivascular flowprobe.
Procedure for zeroing the flowprobe and determining scale settings.
Steps for calibrating the data acquisition system.
Details on probe preparation, site selection, and application methods.
Covers chronic application, flow measurements, and cleaning.
Lists compatible pressure catheters and transducers for the SP430.
Description of the SP430 module's front panel controls and indicators.
Explanation of the SP430 module's different operational modes.
Details on the back panel analog output signals from the SP430 module.
Covers general features, compatibility, and connectors.
Details analog output signals and input/output filter properties.
Covers accuracy, gain, noise, and operational range.
Procedure to check the calibration of individual pressure transducers.
Steps to calibrate the data acquisition system with the SP430 module.
Instructions for using Transonic Scisense pressure catheters.
Details on using dual pressure catheters for two measurements.
Procedures for cleaning and maintaining pressure catheters.
Instructions for using Transpac IV pressure transducers.
Outlines the warranty terms, conditions, and exclusions.
Procedure for returning consoles and modules for service.
Procedure for returning probes, sensors, and catheters.
Explanation of the core transit-time ultrasound technology.
Details on upstream/downstream measurement cycles and beam illumination.
Declares compliance with electromagnetic emissions standards.
Declares compliance with electromagnetic immunity standards.
Provides definitions for symbols and warnings used in the manual.
Safety and handling guidelines for research consoles and modules.
Specific safety precautions for perivascular flowprobes and tubing flowsensors.
Safety considerations for compatible pressure transducers.
Essential rules for safe electrical use of the equipment.
General introduction to the Transonic 400-Series consoles and modules.
Description of console capacity and compatible module types.
Overview of T402 (Four-Bay) and T403 (Six-Bay) consoles.
Guidelines for cleaning and maintaining the console.
Details on the back panel components, including power, outputs, and labels.
Details on console dimensions, weight, and module capacity.
Information on power input, grounding, and fuses.
Explanation of console-to-module connection and signal outputs.
Procedures for installing and removing modules from the console.
Explanation of timing synchronization between modules.
Details on sequential triggering and testing for cross-talk.
Description of compatible ME-PXL and ME-PXN tubing flowsensors.
Overview of the TS410 module's features for flow measurement.
Detailed explanation of the TS410 front panel layout and controls.
Description of the different operational modes of the TS410 module.
Guidance on selecting filter settings for flow recording.
Details on the back panel analog output signals from the TS410 module.
Covers general features, compatibility, and sensor connectors.
Details on digital/analog displays and signal output characteristics.
Covers operational technology, filters, calibration, and synchronization.
Steps for initial setup and connection of the TS410 module.
Procedure for adjusting the zero offset of the flow sensor.
Instructions for adjusting the sensor calibration gain.
Steps to calibrate the data acquisition system.
Explanation of how to navigate and use the TS410 program menu.
Details on setting up and managing alarms.
Instructions for using clamp-on tubing flowsensors.
Details on site selection, preparation, application, and cleaning.
Instructions for using inline tubing flowsensors.
Lists and describes compatible perivascular flowprobe series.
Description of the TS420 module's front panel layout and controls.
Explanation of the TS420 module's different operational modes.
Details on filter settings and analog output signal characteristics.
Information on using calibration keys with TS420 flowprobes.
Covers general features, probe compatibility, and connectors.
Details on digital/analog displays, signal outputs, and frequency range.
Covers technology, controls, filters, calibration, and synchronization.
Steps for setting up and connecting the TS420 module.
Procedure to test the signal quality of the perivascular flowprobe.
Procedure for zeroing the flowprobe and determining scale settings.
Steps for calibrating the data acquisition system.
Details on probe preparation, site selection, and application methods.
Covers chronic application, flow measurements, and cleaning.
Lists compatible pressure catheters and transducers for the SP430.
Description of the SP430 module's front panel controls and indicators.
Explanation of the SP430 module's different operational modes.
Details on the back panel analog output signals from the SP430 module.
Covers general features, compatibility, and connectors.
Details analog output signals and input/output filter properties.
Covers accuracy, gain, noise, and operational range.
Procedure to check the calibration of individual pressure transducers.
Steps to calibrate the data acquisition system with the SP430 module.
Instructions for using Transonic Scisense pressure catheters.
Details on using dual pressure catheters for two measurements.
Procedures for cleaning and maintaining pressure catheters.
Instructions for using Transpac IV pressure transducers.
Outlines the warranty terms, conditions, and exclusions.
Procedure for returning consoles and modules for service.
Procedure for returning probes, sensors, and catheters.
Explanation of the core transit-time ultrasound technology.
Details on upstream/downstream measurement cycles and beam illumination.
Declares compliance with electromagnetic emissions standards.
Declares compliance with electromagnetic immunity standards.
Provides definitions for symbols and warnings used in the manual.
General| Brand | Transonic |
|---|---|
| Model | 400 Series |
| Category | Industrial Equipment |
| Language | English |
